DVP-SS/SS2 Series


The 2nd generation DVP-SS and DVP-SS2 series slim type PLC keeps the basic sequential control functions from the DVP-SS series PLC but with faster execution speed and enhanced real-time monitoring capability.

Specifications
  • MPU points: 14 (8DI + 6DO)
  • Max. I/O points: 494 (14 + 480)
  • Program capacity: 8k steps
  • COM port: Built-in RS-232 & RS-485 ports, compatible with Modbus ASCII/RTU protocol. Can be master or slave.
  • High-Speed Pulse Output:Supports 4 points (Y0 ~ Y3) of independent high-speed (max. 10kHz) pulse output
  • Supports PID Auto-tuning:DVP-SS2 saves parameters automatically after the PID auto temperature tuning is completed.
  • Built-in High-Speed Counters

DVP-ES2/EX2 Series


Delta DVP-ES2 and DVP-EX2 series is a small PLC for basic sequential control. It is economical, highly efficient and functional
Application
HVAC, molding injection machine, big storage management, packaging machine, precise textile machine, logistic system

Specifications

  • MPU points: 16 / 20 / 24 / 32 / 40 / 60
  • Program capacity: 16k steps
  • Built-in with 3 COM ports: 1 RS-232 port and 2 RS-485 ports, all are able to operate independently (Master/Slave)
  • Max. I/O points: 256 input points + 16 output points, or 256 output points + 16 input points
  • DVP-EX2 MPU is built in with 12-bit 4AD/2DA and offers analog/temperature modules of 14-bit resolution.
  • Built-in with 8 high-speed input points (2 points for 100kHz, 6 points for 10kHz) and supports U/D, U/D Dir, A/B counting modes
  • New motion control instructions: Close loop control, alignment mark, shield, immediate variable speed, S-Curve acceleration/deceleration
  • Handy instructions for frequency inverter: For controlling the forward running, reverse running, RUN and STOP of Delta's AC motor drives

DVP-PM Series


The advanced DVP-PM series is specifically designed for motion control application that has become the motion extension module of another PM series MPU, very flexible in all kinds of applications.

Specifications:

  • MPU points: 16
  • Max. I/O points: 512
  • Program capacity: 64K Steps
  • Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol.
  • Data register: 10,000 words (latched)
  • 500KHz high-speed pulse output:
  • - Built-in 2 groups of A/B phase differential signal ouput
  • - X-axis pulse output: (FP0+, FP0-), (RP0+, RP0-)
  • - Y-axis pulse output: (FP1+, FP1-), (RP1+, RP1-)
  • Supports Manual Pulse Generator (MPG) and multi-point external signal inputs

Application: Used for 2-axis servo positioning control, material cutting machine (high-speed servo control), crane operations, material clipper controlled by the servo.

DVP-EH3 Series


The new generation DVP-EH3 PLC is the high-end model of the Delta DVP-E series. It provides larger program capacity and data registers for more demanding and complex applications.

Specifications:

  • Excellent Motion Control
  • High-speed pulse output: 4 sets of 200kHz pulse output (DVP40/48/64/80EH00T3)
  • Supports max. 4 hardware 200kHz high-speed counters
  • Increases many motion control instructions to meet the applications that require high-speed and high-precision
  • positioning control such as labeling machines, packaging machines and printing machines
  • Offers linear / arc interpolation motion control
  • Provides up to 16 external interrupt pointers
  • Complete Program Protection
  • Auto backup function to prevent losing programs and data even when the battery runs out
  • Second copy function provides a backup for extra insurance in the event that one set of programs and data are damaged
  • Up to 4-level password protection protects your source programs and intellectual property Outstanding Operation Performance
  • CPU + ASIC dual processors support floating point operations.
  • The max. execution speed of basic instructions is able to reach 0.24μs.
  • Flexible Function Extension Modules & Cards
  • The multiple selections of extension modules and function cards provide analog I/O, temperature measurement, additional single-axis motion control, high-speed counting, 3rd serial communication port and Ethernet communication card are available.

Application: High-speed 3-axis servo welding machine, high-speed cutting machine, bar feeder, distributed monitor system in production line.

DVP-SV2 Series

The new generation DVP-SV2 PLC is the high-end model of the Delta DVP-S series. It provides larger program capacities and data registers for more demanding and complex applications.

Specifications
  • High-speed pulse output: 4 sets of 200kHz pulse output
  • Supports max. 4 hardware 200kHz high-speed counters
  • Increases many motion control instructions to meet the applications that require high-speed and high-precision positioning
  • Offers linear / arc interpolation motion control
  • Provides up to 16 external interrupt pointers

Applications: 2-axis servo positioning control, material cutting machine (high-speed servo control), main hoist of crane, material clip controlled by servo, equipments in the optoelectronics industry, semiconductor industry, textile industry, energy saving activities and automation in buildings.

DVP-SC Series

Compared to other slim and compact Delta PLC's, the SC series is the best MPU for motion control because of better high-speed pulse output and pulse counting functions.

Specifications
  • MPU points: 12
  • Max. I/O points: 236
  • Program capacity: 8K Steps
  • Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol.
  • High-speed pulse output: Supports 2-point (Y10, Y11) independent high-speed pulse output of up to 100KHz (total bandwidth: 130KHz).
  • Extra 2-axis interpolation.

Applications:2-axis servo position control; material cutting machine (high-speed servo control), crane operation's, material clipper controlled by the servo.